A moving stabilator allows for wider operating range of the control surface, which is of great importance in aircraft with a large range of operating speeds.
Compared to a fixed horizontal stabilizer, when trimmed, the moving stabilitor will produce less drag, reducing fuel consumption.
Asymmetric Committal Altitude/Height is the minimum height needed to establish a positive climb whilst maintaining adequate speed for control and removal of drag during an approach to a landing.
In the Seneca at Oxford we used 200ft AGL. At this altitude when continuing for landing you selected the landing flaps (check clear runway, on speed, on altitude, landing clearance received).
You now are committed to land, single engine G/A with flaps 40 and gear down is not possible in a Seneca.
1.98°C per 1000ft
Fuel injection provides:
Fuel free from vaporization ice
Better economy through metered delivery
More responsive and efficient engine
Less maintenance
Carb icing can occur with temperatures as high 30°C and humidity as low as 50%, but it is more likely when below 20°C and high humidity, especially during low power settings.
GPWS is a central computer system that receives various data inputs on configuration, (radio altimeter) height/altitude and instrument landing system glide slope deviation and is able to alert the pilot when a dangerous situation is about to occur.
Battery power to the starter motors.
At the tip
In Newfoundland. With cold weather density increases, therefore you would pick up a higher mass in Newfoundland.
Approximately 6.5 years